| |
Programmable Digital Radio Receiver (DRR) DCM
p/n |
Description |
Host TORNADO
DCM site I/F |
TORNADO-PX/DDC4G (rev.2A)
replacement:
TORNADO-PX/DDC4G rev.3 |
Quad-channel DRR PIOX/PIOX-16 Coprocessor DCM with two 105MHz 14-bit ADC, TI/Graychip GC4016 quad-channel DDC
with internal ADC streams cross-bar switch, low phase noise
ultra-high resolution programmable sampling frequency generator, quad-channel
FIFO with input data stream multiplexer and data formatter, dual
384 kBaud UART with RS232C I/F, 480 Mbit/s USB 2.0
I/F, dual 12-bit AGC D/A, dual AGC serial links, headphones output, 4-bit
GPIO, 1 GHz MHz 32-bit fixed-point TMS320C6416 DSP,
up to 1Mx32 SBSRAM, up to 32Mx32 SDRAM, up to 8Mx8 FLASH,
two external high-speed serial I/O links, stand-alone operation. (The highlighted text
above specifies enhanced product features versus the obsoleted rev.1A
board.) |
PIOX/PIOX-16 |
TORNADO-PX/DDC4
|
Quad-channel DRR PIOX-16 Coprocessor DCM with two 65MHz 12-bit ADC,
2:3 ADC streams cross-bar switch, quad Harris HSP50214 PDC, two programmable sampling
frequency generators, PDC bypass channel with 256K FIFO, dual 115 kBaud UART with RS232C
i/f, dual 12-bit AGC D/A, dual AGC serial links, headphones output, 2-bit GPIO, 160 MIPS
TMS320C5416 DSP, 32Kx16 dual-port RAM, 128KB FLASH, external high-speed serial I/O link.
Allows stand-alone operation. |
PIOX-16 |
T/SDAS-DDC1
|
Programmable DRR DCM with 65MHz 12-bit ADC, Harris HSP50214 PDC, 115 kBaud
UART with RS232C i/f, dual 12-bit AGC/headphones D/A, two AGC serial link, 1 bit DIO |
SIOX |
IF options for Digital Radio Receiver DCM
p/n |
Description |
T/X-DDC/AFE-10.7M/BWxxx |
External RF amplifier for TORNADO-PX/DDC4G, TORNADO-PX/DDC4 and
T/SDAS-DDC1. Fc=10.7MHz, bandwidth BW=xxx (xxx=160kHz/320kHz/500kHz/1MHz/2MHz), G=0..80dB.
Other specs available. Call MicroLAB Systems for a complete specification list. |
Utility software and on-line manuals:
|